spawn qemu-system-microblaze -machine petalogix-s3adsp1800 -kernel /builds/free-electrons/toolchains-builder/build/tmp/test-microblazebe--musl--bleeding-edge/images/linux.bin -drive file=/builds/free-electrons/toolchains-builder/build/tmp/test-microblazebe--musl--bleeding-edge/images/rootfs.cpio,index=0,media=disk,format=raw -append root=/dev/sda rw -nographic
Warning: Orphaned drive without device: id=ide0-hd0,file=/builds/free-electrons/toolchains-builder/build/tmp/test-microblazebe--musl--bleeding-edge/images/rootfs.cpio,if=ide,bus=0,unit=0
Ramdisk addr 0x00000000, 

FDT at 0x90512a44

Linux version 4.11.3 (root@runner-e11ae361-project-3290221-concurrent-0) (gcc version 7.2.0 (Buildroot 2017.08-rc2-00005-g5c1b185) ) #2 Tue Aug 15 19:20:21 UTC 2017

setup_cpuinfo: initialising

setup_cpuinfo: No PVR support. Using static CPU info from FDT

wt_msr

setup_memory: max_mapnr: 0x8000

setup_memory: min_low_pfn: 0x90000

setup_memory: max_low_pfn: 0x98000

setup_memory: max_pfn: 0x98000

Zone ranges:

  DMA      [mem 0x0000000090000000-0x0000000097ffffff]

  Normal   empty

Movable zone start for each node

Early memory node ranges

  node   0: [mem 0x0000000090000000-0x0000000097ffffff]

Initmem setup node 0 [mem 0x0000000090000000-0x0000000097ffffff]

On node 0 totalpages: 32768

free_area_init_node: node 0, pgdat c0405944, node_mem_map c0547000

  DMA zone: 256 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 32768 pages, LIFO batch:7

pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

pcpu-alloc: [0] 0 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512

Kernel command line: root=/dev/sda rw

PID hash table entries: 512 (order: -1, 2048 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 124364K/131072K available (3348K kernel code, 112K rwdata, 616K rodata, 1062K init, 205K bss, 6708K reserved, 0K cma-reserved)

Kernel virtual memory layout:

  * 0xffffe000..0xfffff000  : fixmap

  * 0xffffe000..0xffffe000  : early ioremap

  * 0xf0000000..0xffffe000  : vmalloc & ioremap

SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

NR_IRQS:33

irq-xilinx: /plb@0/interrupt-controller@81800000: num_irq=4, edge=0xa

ERROR: CPU CCF input clock not found

/plb@0/timer@83c00000: irq=1

ERROR: timer CCF input clock not found

ERROR: Using CPU clock frequency

clocksource: xilinx_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns

xilinx_timer_shutdown

xilinx_timer_set_periodic

sched_clock: 32 bits at 62MHz, resolution 16ns, wraps every 34359738360ns

Console: colour dummy device 80x25

console [tty0] enabled

Calibrating delay loop... 205.82 BogoMIPS (lpj=411648)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

devtmpfs: initialized

cpu cpu0: Error -2 creating of_node link

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

futex hash table entries: 256 (order: -1, 3072 bytes)

NET: Registered protocol family 16

clocksource: Switched to clocksource xilinx_clocksource

NET: Registered protocol family 2

TCP established hash table entries: 1024 (order: 0, 4096 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 1024 bind 1024)

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

workingset: timestamp_bits=30 max_order=15 bucket_order=0

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

io scheduler mq-deadline registered

84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 4, base_baud = 0) is a uartlite

console [ttyUL0] enabled

libphy: Fixed MDIO Bus: probed

xilinx_emaclite 81000000.ethernet: Device Tree Probing

xilinx_emaclite 81000000.ethernet: Failed to register mdio bus.

xilinx_emaclite 81000000.ethernet: error registering MDIO bus

xilinx_emaclite 81000000.ethernet: MAC address is now 02:00:00:00:00:00

xilinx_emaclite 81000000.ethernet: Xilinx EmacLite at 0x81000000 mapped to 0xF0040000, irq=2

NET: Registered protocol family 10

Segment Routing with IPv6

sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

NET: Registered protocol family 17

Freeing unused kernel memory: 1060K

This architecture does not have kernel memory protection.

random: fast init done

Starting logging: OK

Initializing random number generator... done.

Starting network: udhcpc: started, v1.27.1

udhcpc: sending discover

udhcpc: sending select for 10.0.2.15

udhcpc: lease of 10.0.2.15 obtained, lease time 86400

deleting routers

adding dns 10.0.2.3

OK

Starting tests

TODO: add some more tests

Ending tests




Welcome to Buildroot


buildroot login: root

# poweroff

# This is the toolchain test suite

Usage: /etc/init.d/S90tests start

Stopping network: OK

Saving random seed... done.

Stopping logging: OK

umount: devtmpfs busy - remounted read-only

umount: can't unmount /: Invalid argument


The system is going down NOW!


Sent SIGTERM to all processes


Sent SIGKILL to all processes


Requesting system poweroff

reboot: System halted