Linux version 6.6.18 (br-user@runner-fmzeppyu-project-3290221-concurrent-1) (mips64el-linux-gcc.br_real (Buildroot 2021.11-12449-g1bef613319) 13.3.0, GNU ld (GNU Binutils) 2.41) #1 Sun Aug 18 00:31:09 UTC 2024 GCRs appear to have been moved (expected them at 0x1fbf8000)! earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') printk: bootconsole [uart8250] enabled Config serial console: console=ttyS0,38400n8r CPU0 revision is: 0001a900 (MIPS I6400) FPU revision is: 20f30300 GCRs appear to have been moved (expected them at 0x1fbf8000)! MIPS: machine is mti,malta Software DMA cache coherency enabled Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 64 bytes Zone ranges: DMA [mem 0x0000000000000000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000007ffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] random: crng init done Kernel command line: rootwait root=/dev/sda console=ttyS0,38400n8r Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) Built 1 zonelists, mobility grouping on. Total pages: 32320 mem auto-init: stack:all(zero), heap alloc:off, heap free:off MAAR configuration: [0]: 0x0000000000000000-0x0000000007ffffff speculate [1]: disabled [2]: disabled [3]: disabled [4]: disabled [5]: disabled [6]: disabled [7]: disabled Memory: 119692K/131072K available (5615K kernel code, 764K rwdata, 1372K rodata, 228K init, 316K bss, 11380K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS: 256 CPU frequency 320.00 MHz clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945389961 ns sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421786108ns Console: colour dummy device 80x25 Calibrating delay loop... 632.83 BogoMIPS (lpj=1265664) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 0, 6144 bytes, linear) NET: Registered PF_NETLINK/PF_ROUTE protocol family SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB pci 0000:00:0b.0: [1022:2000] type 00 class 0x020000 pci 0000:00:0b.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:0b.0: reg 0x14: [mem 0x00000000-0x0000001f] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] pci 0000:00:12.0: [1013:00b8] type 00 class 0x030000 pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x01ffffff pref] pci 0000:00:12.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x11ffffff pref] pci 0000:00:0b.0: BAR 6: assigned [mem 0x12000000-0x1203ffff pref] pci 0000:00:12.0: BAR 6: assigned [mem 0x12040000-0x1204ffff pref] pci 0000:00:12.0: BAR 1: assigned [mem 0x12050000-0x12050fff] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] pci 0000:00:0b.0: BAR 0: assigned [io 0x1060-0x107f] pci 0000:00:0b.0: BAR 1: assigned [mem 0x12051000-0x1205101f] pci 0000:00:0a.1: BAR 4: assigned [io 0x1080-0x108f] pci 0000:00:12.0: vgaarb: setting as boot VGA device pci 0000:00:12.0: vgaarb: bridge control possible pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none vgaarb: loaded clocksource: Switched to clocksource MIPS NET: Registered PF_INET protocol family IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 1024 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family pci 0000:00:0a.2: enabling device (0000 -> 0001) PCI: CLS 0 bytes, default 64 workingset: timestamp_bits=62 max_order=15 bucket_order=0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler mq-deadline registered io scheduler kyber registered cirrusfb 0000:00:12.0: vgaarb: deactivate vga console cirrusfb 0000:00:12.0: enabling device (0000 -> 0002) cirrusfb 0000:00:12.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0x10000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A ata_piix 0000:00:0a.1: enabling device (0000 -> 0001) scsi host0: ata_piix scsi host1: ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15 pcnet32 0000:00:0b.0: enabling device (0000 -> 0003) pcnet32: PCnet/PCI II 79C970A at 0x1060, 52:54:00:12:34:56 assigned IRQ 11 pcnet32: eth0: registered as PCnet/PCI II 79C970A pcnet32: 1 cards_found uhci_hcd 0000:00:0a.2: UHCI Host Controller uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:0a.2: irq 10, io port 0x00001040 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered PF_PACKET protocol family clk: Disabling unused clocks ata2: found unknown device (class 0) ata1: found unknown device (class 0) ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 ata1.00: 122880 sectors, multi 16: LBA48 ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 122880 512-byte logical blocks: (62.9 MB/60.0 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda): mounted filesystem ac6770df-7899-4117-8a2f-dae90b80103e ro without journal. Quota mode: disabled. VFS: Mounted root (ext2 filesystem) readonly on device 8:0. devtmpfs: mounted Freeing unused kernel image (initmem) memory: 228K This architecture does not have kernel memory protection. Run /sbin/init as init process EXT4-fs (sda): re-mounted ac6770df-7899-4117-8a2f-dae90b80103e r/w. Quota mode: disabled. Saving 256 bits of creditable seed for next boot Starting syslogd: OK Starting klogd: OK Running sysctl: OK Starting network: pcnet32 0000:00:0b.0 eth0: link up udhcpc: started, v1.36.1 udhcpc: broadcasting discover udhcpc: broadcasting select for 10.0.2.15, server 10.0.2.2 udhcpc: lease of 10.0.2.15 obtained from 10.0.2.2, lease time 86400 deleting routers adding dns 10.0.2.3 OK Starting tests TODO: add some more tests Ending tests Welcome to Buildroot buildroot login: root root # poweroff poweroff # # This is the toolchain test suite Usage: /etc/init.d/S90tests start Stopping network: OK Stopping klogd: OK Stopping syslogd: OK Seeding 256 bits and crediting Saving 256 bits of creditable seed for next boot umount: devtmpfs busy - remounted read-only EXT4-fs (sda): re-mounted ac6770df-7899-4117-8a2f-dae90b80103e ro. Quota mode: disabled. The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff sd 0:0:0:0: [sda] Synchronizing SCSI cache reboot: System halted Cannot halt machine