spawn qemu-system-mips64el -M malta -cpu I6400 -kernel /builds/bootlin/toolchains-builder/build/opt/test-mips64r6el-n32--uclibc--bleeding-edge/images/vmlinux -drive file=/builds/bootlin/toolchains-builder/build/opt/test-mips64r6el-n32--uclibc--bleeding-edge/images/rootfs.ext2,format=raw -append rootwait root=/dev/hda -nographic -nographic Linux version 5.4.58 (root@runner-46b8b5e9-project-3290221-concurrent-1) (gcc version 10.2.0 (Buildroot 2020.08-14-ge5a2a90)) #1 Thu Oct 1 05:08:39 UTC 2020 GCRs appear to have been moved (expected them at 0x1fbf8000)! earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') printk: bootconsole [uart8250] enabled Config serial console: console=ttyS0,38400n8r CPU0 revision is: 0001a900 (MIPS I6400) FPU revision is: 20f30300 GCRs appear to have been moved (expected them at 0x1fbf8000)! OF: fdt: No chosen node found, continuing without MIPS: machine is mti,malta Software DMA cache coherency enabled Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 64 bytes Zone ranges: DMA [mem 0x0000000000000000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000007ffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] Built 1 zonelists, mobility grouping on. Total pages: 32320 Kernel command line: rootwait root=/dev/hda console=ttyS0,38400n8r Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off MAAR configuration: [0]: 0x0000000000000000-0x0000000007ffffff speculate [1]: disabled [2]: disabled [3]: disabled [4]: disabled [5]: disabled [6]: disabled [7]: disabled Memory: 121296K/131072K available (4782K kernel code, 324K rwdata, 1160K rodata, 176K init, 246K bss, 9776K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS: 256 random: get_random_bytes called from start_kernel+0x2c0/0x410 with crng_init=0 CPU frequency 200.00 MHz clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112624915 ns sched_clock: 32 bits at 99MHz, resolution 10ns, wraps every 21474859002ns Console: colour dummy device 80x25 Calibrating delay loop... 786.43 BogoMIPS (lpj=1572864) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 0, 6144 bytes, linear) NET: Registered protocol family 16 vgaarb: loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB pci 0000:00:0b.0: [1022:2000] type 00 class 0x020000 pci 0000:00:0b.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:0b.0: reg 0x14: [mem 0x00000000-0x0000001f] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:12.0: [1013:00b8] type 00 class 0x030000 pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x01ffffff pref] pci 0000:00:12.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x11ffffff pref] pci 0000:00:0b.0: BAR 6: assigned [mem 0x12000000-0x1207ffff pref] pci 0000:00:12.0: BAR 6: assigned [mem 0x12080000-0x1208ffff pref] pci 0000:00:12.0: BAR 1: assigned [mem 0x12090000-0x12090fff] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] pci 0000:00:0b.0: BAR 0: assigned [io 0x1060-0x107f] pci 0000:00:0b.0: BAR 1: assigned [mem 0x12091000-0x1209101f] pci 0000:00:0a.1: BAR 4: assigned [io 0x1080-0x108f] clocksource: Switched to clocksource MIPS NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) TCP established hash table entries: 1024 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 pci 0000:00:0a.2: enabling device (0000 -> 0001) PCI: CLS 0 bytes, default 64 workingset: timestamp_bits=62 max_order=15 bucket_order=0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler mq-deadline registered io scheduler kyber registered cirrusfb 0000:00:12.0: enabling device (0000 -> 0002) cirrusfb 0000:00:12.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0x10000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Uniform Multi-Platform E-IDE driver piix 0000:00:0a.1: IDE controller (0x8086:0x7111 rev 0x00) pci 0000:00:0a.1: enabling device (0000 -> 0001) piix 0000:00:0a.1: not 100% native mode: will probe irqs later legacy IDE will be removed in 2021, please switch to libata Report any missing HW support to linux-ide@vger.kernel.org ide0: BM-DMA at 0x1080-0x1087 ide1: BM-DMA at 0x1088-0x108f hda: QEMU HARDDISK, ATA DISK drive random: fast init done hda: UDMA/33 mode selected hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 1024KiB hda: 122880 sectors (62 MB) w/256KiB Cache, CHS=121/255/63 hda: cache flushes supported ide-cd driver 5.00 ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de pcnet32 0000:00:0b.0: enabling device (0000 -> 0003) pcnet32: PCnet/PCI II 79C970A at 0x1060, 52:54:00:12:34:56 assigned IRQ 10 pcnet32: eth0: registered as PCnet/PCI II 79C970A pcnet32: 1 cards_found uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:0a.2: UHCI Host Controller uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001040 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 EXT4-fs (hda): mounting ext2 file system using the ext4 subsystem EXT4-fs (hda): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 3:0. devtmpfs: mounted Freeing unused kernel memory: 176K This architecture does not have kernel memory protection. Run /sbin/init as init process EXT4-fs (hda): re-mounted. Opts: (null) ext2 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Starting network: pcnet32 0000:00:0b.0 eth0: link up udhcpc: started, v1.31.1 random: mktemp: uninitialized urandom read (6 bytes read) udhcpc: sending discover udhcpc: sending select for 10.0.2.15 udhcpc: lease of 10.0.2.15 obtained, lease time 86400 deleting routers random: mktemp: uninitialized urandom read (6 bytes read) adding dns 10.0.2.3 OK Starting tests TODO: add some more tests Ending tests Welcome to Buildroot buildroot login: root # poweroff # This is the toolchain test suite Usage: /etc/init.d/S90tests start Stopping network: random: mktemp: uninitialized urandom read (6 bytes read) OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only EXT4-fs (hda): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff Shutdown: hda reboot: System halted