spawn qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel /builds/bootlin/toolchains-builder/build/opt/test-powerpc64-e5500--glibc--bleeding-edge/images/uImage -drive file=/builds/bootlin/toolchains-builder/build/opt/test-powerpc64-e5500--glibc--bleeding-edge/images/rootfs.ext2,if=virtio,format=raw -append console=ttyS0 rootwait root=/dev/vda -serial mon:stdio -nographic -nographic MMU: Supported page sizes 4 KB as direct 4096 KB as direct 16384 KB as direct 65536 KB as direct 262144 KB as direct 1048576 KB as direct MMU: Book3E HW tablewalk not supported Linux version 5.4.58 (root@runner-48369508-project-3290221-concurrent-0) (gcc version 10.2.0 (Buildroot 2020.08-14-ge5a2a90)) #1 SMP Thu Oct 1 06:39:33 UTC 2020 Using QEMU e500 machine description printk: bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core ----------------------------------------------------- phys_mem_size = 0x10000000 dcache_bsize = 0x40 icache_bsize = 0x40 cpu_features = 0x00000003008001b4 possible = 0x00000003009003b6 always = 0x00000003008003b4 cpu_user_features = 0xcc008000 0x08000000 mmu_features = 0x000a0010 firmware_features = 0x0000000000000000 ----------------------------------------------------- qemu_e500_setup_arch() barrier-nospec: using isync; sync as speculation barrier Zone ranges: DMA [mem 0x0000000000000000-0x000000000fffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000000fffffff] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] MMU: Allocated 2112 bytes of context maps for 255 contexts percpu: Embedded 28 pages/cpu s76760 r0 d37928 u1048576 Built 1 zonelists, mobility grouping on. Total pages: 64640 Kernel command line: console=ttyS0 rootwait root=/dev/vda Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 173060K/262144K available (11520K kernel code, 2056K rwdata, 3500K rodata, 572K init, 260K bss, 89084K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 rcu: Hierarchical RCU implementation. rcu: RCU event tracing is enabled. rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=1. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 mpic: Setting up MPIC " OpenPIC " version 1.2 at fe0040000, max 1 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources random: get_random_u64 called from .start_kernel+0x438/0x6b8 with crng_init=0 clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns clocksource: timebase mult[2800000] shift[24] registered Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) e500 family performance monitor hardware support registered rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU Using standard scheduler topology devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes, linear) NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) Found FSL PCI host bridge at 0x0000000fe0008000. Firmware bus number: 0->255 PCI host bridge /pci@fe0008000 (primary) ranges: MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 IO 0x0000000fe1000000..0x0000000fe100ffff -> 0x0000000000000000 /pci@fe0008000: PCICSRBAR @ 0xdff00000 setup_pci_atmu: end of DRAM 10000000 Machine: QEMU ppce500 SoC family: QorIQ SoC ID: svr:0x00000000, Revision: 0.0 audit: type=2000 audit(0.112:1): state=initialized audit_enabled=0 res=1 fsl-pamu: fsl_pamu_init: could not find a PAMU node PCI: Probing PCI hardware fsl-pci fe0008000.pci: PCI host bridge to bus 8000:00 pci_bus 8000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) pci_bus 8000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 8000:00: root bus resource [bus 00-ff] pci_bus 8000:00: busn_res: [bus 00-ff] end is updated to ff pci 8000:00:00.0: [1957:0030] type 00 class 0x0b2000 pci 8000:00:00.0: reg 0x10: [mem 0xdff00000-0xdfffffff] pci 8000:00:01.0: [1af4:1000] type 00 class 0x020000 pci 8000:00:01.0: reg 0x10: [io 0x8000080000010000-0x800008000001001f] pci 8000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 8000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci 8000:00:01.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] pci 8000:00:02.0: [1af4:1001] type 00 class 0x010000 pci 8000:00:02.0: reg 0x10: [io 0x8000080000010000-0x800008000001007f] pci 8000:00:02.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 8000:00:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci_bus 8000:00: busn_res: [bus 00-ff] end is updated to 00 pci 8000:00:01.0: BAR 6: assigned [mem 0xc00000000-0xc0007ffff pref] pci 8000:00:01.0: BAR 4: assigned [mem 0xc00080000-0xc00083fff 64bit pref] pci 8000:00:02.0: BAR 4: assigned [mem 0xc00084000-0xc00087fff 64bit pref] pci 8000:00:01.0: BAR 1: assigned [mem 0xc00088000-0xc00088fff] pci 8000:00:02.0: BAR 1: assigned [mem 0xc00089000-0xc00089fff] pci 8000:00:02.0: BAR 0: assigned [io 0x8000080000010000-0x800008000001007f] pci 8000:00:01.0: BAR 0: assigned [io 0x8000080000010080-0x800008000001009f] pci_bus 8000:00: resource 4 [io 0x8000080000010000-0x800008000001ffff] pci_bus 8000:00: resource 5 [mem 0xc00000000-0xc1fffffff] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages HugeTLB registered 64.0 MiB page size, pre-allocated 0 pages HugeTLB registered 256 MiB page size, pre-allocated 0 pages HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages Freescale Elo series DMA driver iommu: Default domain type: Translated vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource timebase NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 workingset: timestamp_bits=62 max_order=16 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ntfs: driver 2.1.32 [Flags: R/O]. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler mq-deadline registered io scheduler kyber registered virtio-pci 8000:00:01.0: enabling device (0000 -> 0003) virtio-pci 8000:00:02.0: enabling device (0000 -> 0003) Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [udbg0] disabled printk: bootconsole [udbg0] disabled ePAPR hypervisor byte channel driver brd: module loaded loop: module loaded virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) st: Version 20160209, fixed bufsize 32768, s/g segs 256 libphy: Fixed MDIO Bus: probed e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k igb: Copyright (c) 2007-2014 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ehci-fsl: Freescale EHCI Host controller driver usbcore: registered new interface driver usb-storage i2c /dev entries driver mpc-i2c fe0003000.i2c: timeout 1000000 us rtc-ds1307 0-0068: registered as rtc0 Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) MPC85xx_edac acquired irq 24 for PCI Err MPC85xx_edac PCI err registered sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper Freescale hypervisor management driver fsl-hv: no hypervisor found ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered drmem: No dynamic reconfiguration memory found rtc-ds1307 0-0068: setting system clock to 2020-10-01T06:50:23 UTC (1601535023) ALSA device list: No soundcards found. EXT4-fs (vda): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. devtmpfs: mounted Freeing unused kernel memory: 572K This architecture does not have kernel memory protection. Run /sbin/init as init process EXT4-fs (vda): re-mounted. Opts: (null) ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Starting network: OK Starting tests TODO: add some more tests Ending tests Welcome to Buildroot buildroot login: root # poweroff # This is the toolchain test suite Usage: /etc/init.d/S90tests start Stopping network: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only EXT4-fs (vda): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff reboot: Power down