spawn qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel /builds/bootlin/toolchains-builder/build/opt/test-powerpc64-power8--musl--bleeding-edge/images/vmlinux -append console=hvc0 rootwait root=/dev/sda -drive file=/builds/bootlin/toolchains-builder/build/opt/test-powerpc64-power8--musl--bleeding-edge/images/rootfs.ext2,if=scsi,index=0,format=raw -display curses -cpu POWER8 -nographic qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-cfpc=workaround qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-sbbc=workaround qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ibs=workaround SLOF[?25l ********************************************************************** QEMU Starting  Build Date = Jan 31 2020 20:27:09 FW Version = buildd@ release 20191209 Press "s" to enter Open Firmware. [?25hC0000 C0100 C0120 C0140 C0200 C0240 C0260 C02E0 C0300 C0320 C0340 C0360 C0370 C0380 C0371 C0373 C0374 C03F0 C0400 C0480 C04C0 C04D0 C0500 Populating /vdevice methods Populating /vdevice/vty@71000000 Populating /vdevice/nvram@71000001 Populating /vdevice/l-lan@71000002 Populating /vdevice/v-scsi@71000003 SCSI: Looking for devices 8000000000000000 DISK : "QEMU QEMU HARDDISK 2.5+" 8200000000000000 CD-ROM : "QEMU QEMU CD-ROM 2.5+" C05A0 Populating /pci@800000020000000 00 0000 (D) : 1234 1111 qemu vga 00 0800 (D) : 1033 0194 serial bus [ usb-xhci ] C0600 C06C0 C0700 C0800 C0880 No NVRAM common partition, re-initializing... C0890 C08A0 C08A8 Installing QEMU fb C08B0 Scanning USB XHCI: Initializing C08C0 C08D0 No console specified using hvterm C08E0 C08E8 Detected RAM kernel at 400000 (144c568 bytes) C08FF Welcome to Open Firmware Copyright (c) 2004, 2017 IBM Corporation All rights reserved. This program and the accompanying materials are made available under the terms of the BSD License available at http://www.opensource.org/licenses/bsd-license.php Booting from memory... OF stdout device is: /vdevice/vty@71000000 Preparing to boot Linux version 5.4.58 (root@runner-48369508-project-3290221-concurrent-2) (gcc version 10.2.0 (Buildroot 2020.08-14-ge5a2a90)) #1 SMP Thu Oct 1 07:39:49 UTC 2020 Detected machine type: 0000000000000101 command line: console=hvc0 rootwait root=/dev/sda Max number of cores passed to firmware: 2048 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 0000000001860000 alloc_top : 0000000010000000 alloc_top_hi : 0000000010000000 rmo_top : 0000000010000000 ram_top : 0000000010000000 found display : /pci@800000020000000/vga@0, opening... done instantiating rtas at 0x000000000fff0000... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0000000001870000 -> 0x0000000001870b0d Device tree struct 0x0000000001880000 -> 0x0000000001890000 Quiescing Open Firmware ... Booting Linux via __start() @ 0x0000000000400000 ... [ 0.000000] hash-mmu: Page sizes from device-tree: [ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0 [ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1 [ 0.000000] Using 1TB segments [ 0.000000] hash-mmu: Initializing hash mmu with SLB [ 0.000000] Linux version 5.4.58 (root@runner-48369508-project-3290221-concurrent-2) (gcc version 10.2.0 (Buildroot 2020.08-14-ge5a2a90)) #1 SMP Thu Oct 1 07:39:49 UTC 2020 [ 0.000000] Using pSeries machine description [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] Partition configured for 1 cpus. [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x10000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x000000ef8f4d91a7 [ 0.000000] possible = 0x0001fbffffffb1af [ 0.000000] always = 0x00000000000001a0 [ 0.000000] cpu_user_features = 0xdc0065c2 0xae000000 [ 0.000000] mmu_features = 0x78006001 [ 0.000000] firmware_features = 0x00000005455a445f [ 0.000000] vmalloc start = 0xc008000000000000 [ 0.000000] IO start = 0xc00a000000000000 [ 0.000000] vmemmap start = 0xc00c000000000000 [ 0.000000] hash-mmu: ppc64_pft_size = 0x15 [ 0.000000] hash-mmu: htab_hash_mask = 0x3fff [ 0.000000] ----------------------------------------------------- [ 0.000000] numa: NODE_DATA [mem 0x0ffb6f80-0x0ffbbfff] [ 0.000000] rfi-flush: fallback displacement flush available [ 0.000000] rfi-flush: ori type flush available [ 0.000000] rfi-flush: mttrig type flush available [ 0.000000] link-stack-flush: software flush enabled. [ 0.000000] count-cache-flush: full software flush sequence enabled. [ 0.000000] stf-barrier: hwsync barrier available [ 0.000000] PCI host bridge /pci@800000020000000 ranges: [ 0.000000] IO 0x0000200000000000..0x000020000000ffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000200080000000..0x00002000ffffffff -> 0x0000000080000000 [ 0.000000] MEM 0x0000210000000000..0x000021ffffffffff -> 0x0000210000000000 [ 0.000000] PCI: OF: PROBE_ONLY disabled [ 0.000000] PPC64 nvram contains 65536 bytes [ 0.000000] barrier-nospec: using ORI speculation barrier [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] percpu: Embedded 11 pages/cpu s624536 r0 d96360 u1048576 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4092 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=hvc0 rootwait root=/dev/sda [ 0.000000] Dentry cache hash table entries: 32768 (order: 2, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 1, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 172992K/262144K available (12672K kernel code, 2496K rwdata, 2496K rodata, 1600K init, 1457K bss, 89152K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 29709 entries in 11 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] random: get_random_u64 called from .start_kernel+0x434/0x680 with crng_init=0 [ 0.000423] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns [ 0.001186] clocksource: timebase mult[1f40000] shift[24] registered [ 0.009473] Console: colour dummy device 80x25 [ 0.010558] printk: console [hvc0] enabled [ 0.010558] printk: console [hvc0] enabled [ 0.011374] printk: bootconsole [udbg0] disabled [ 0.011374] printk: bootconsole [udbg0] disabled [ 0.020617] pid_max: default: 32768 minimum: 301 [ 0.022747] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.022947] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.090121] EEH: pSeries platform initialized [ 0.090906] POWER8 performance monitor hardware support registered [ 0.092760] rcu: Hierarchical SRCU implementation. [ 0.105742] smp: Bringing up secondary CPUs ... [ 0.106021] smp: Brought up 1 node, 1 CPU [ 0.107689] numa: Node 0 CPUs: 0 [ 0.109616] Using standard scheduler topology [ 0.127792] devtmpfs: initialized [ 0.149009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149415] futex hash table entries: 256 (order: -1, 32768 bytes, linear) [ 0.166425] NET: Registered protocol family 16 [ 0.170882] IBM eBus Device Driver [ 0.172831] audit: initializing netlink subsys (disabled) [ 0.181954] cpuidle: using governor menu [ 0.185656] audit: type=2000 audit(1601538671.150:1): state=initialized audit_enabled=0 res=1 [ 0.189952] pstore: Registered nvram as persistent store backend Linux ppc64 #1 SMP Thu Oct 1[ 0.202666] PCI: Probing PCI hardware [ 0.206612] PCI host bridge to bus 0000:00 [ 0.207636] pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 0.207939] pci_bus 0000:00: root bus resource [mem 0x200080000000-0x2000ffffffff] (bus address [0x80000000-0xffffffff]) [ 0.208049] pci_bus 0000:00: root bus resource [mem 0x210000000000-0x21ffffffffff] [ 0.208478] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.222967] IOMMU table initialized, virtual merging enabled [ 0.224226] pci 0000:00:00.0: Adding to iommu group 0 [ 0.225173] pci 0000:00:01.0: Adding to iommu group 0 [ 0.230472] pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff] [ 0.230606] pci_bus 0000:00: resource 5 [mem 0x200080000000-0x2000ffffffff] [ 0.230652] pci_bus 0000:00: resource 6 [mem 0x210000000000-0x21ffffffffff] [ 0.232490] EEH: No capable adapters found: recovery disabled. [ 0.273170] cryptomgr_test (23) used greatest stack depth: 14064 bytes left [ 0.286086] iommu: Default domain type: Translated [ 0.291076] pci 0000:00:00.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.291290] pci 0000:00:00.0: vgaarb: bridge control possible [ 0.291450] pci 0000:00:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.291597] vgaarb: loaded [ 0.294109] SCSI subsystem initialized [ 0.297442] usbcore: registered new interface driver usbfs [ 0.297949] usbcore: registered new interface driver hub [ 0.298247] usbcore: registered new device driver usb [ 0.298837] pps_core: LinuxPPS API ver. 1 registered [ 0.298898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.299053] PTP clock support registered [ 0.316688] clocksource: Switched to clocksource timebase [ 0.998052] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.026489] NET: Registered protocol family 2 [ 1.035681] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear) [ 1.036088] TCP established hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 1.036465] TCP bind hash table entries: 8192 (order: 1, 131072 bytes, linear) [ 1.036791] TCP: Hash tables configured (established 8192 bind 8192) [ 1.039140] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 1.039625] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 1.041884] NET: Registered protocol family 1 [ 1.046979] RPC: Registered named UNIX socket transport module. [ 1.047153] RPC: Registered udp transport module. [ 1.047201] RPC: Registered tcp transport module. [ 1.047256] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.051272] PCI: CLS 0 bytes, default 128 [ 1.073702] workingset: timestamp_bits=38 max_order=12 bucket_order=0 [ 1.095932] NFS: Registering the id_resolver key type [ 1.097526] Key type id_resolver registered [ 1.097647] Key type id_legacy registered [ 1.100157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.100365] io scheduler mq-deadline registered [ 1.100498] io scheduler kyber registered [ 1.103655] Using unsupported 800x600 (null) at 200080000000, depth=32, pitch=3200 [ 1.120168] Console: switching to colour frame buffer device 100x37 [ 1.126244] fb0: Open Firmware frame buffer device on /pci@800000020000000/vga@0 [ 1.239526] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.245731] Non-volatile memory driver v1.3 [ 1.300779] brd: module loaded [ 1.327184] loop: module loaded [ 1.327736] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017) [ 1.331820] ibmvscsi 71000003: SRP_VERSION: 16.a [ 1.332847] ibmvscsi 71000003: Maximum ID: 64 Maximum LUN: 32 Maximum Channel: 3 [ 1.332998] scsi host0: IBM POWER Virtual SCSI Adapter 1.5.9 [ 1.339863] ibmvscsi 71000003: partner initialization complete [ 1.341192] ibmvscsi 71000003: host srp version: 16.a, host partition qemu (0), OS 2, max io 2097152 [ 1.341538] ibmvscsi 71000003: sent SRP login [ 1.344210] ibmvscsi 71000003: SRP_LOGIN succeeded [ 1.360768] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 1.374627] scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.509594] random: fast init done [ 1.723304] sr 0:0:2:0: Power-on or device reset occurred [ 1.725453] sd 0:0:0:0: Power-on or device reset occurred [ 1.727175] sd 0:0:0:0: [sda] 122880 512-byte logical blocks: (62.9 MB/60.0 MiB) [ 1.727566] sd 0:0:0:0: [sda] Write Protect is off [ 1.728104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.730717] sr 0:0:2:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray [ 1.731007] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.740285] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.740967] sr 0:0:2:0: Attached scsi generic sg1 type 5 [ 1.743441] libphy: Fixed MDIO Bus: probed [ 1.746440] ehea: IBM eHEA ethernet device driver (Release EHEA_0107) [ 1.746734] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.746784] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.746954] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.747011] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.747194] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.747240] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.747453] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.747567] ehci-pci: EHCI PCI platform driver [ 1.747879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.748067] ohci-pci: OHCI PCI platform driver [ 1.750678] xhci_hcd 0000:00:01.0: xHCI Host Controller [ 1.751401] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1 [ 1.753964] xhci_hcd 0000:00:01.0: ibm,query-pe-dma-windows(2026) 800 8000000 20000000 returned 0 [ 1.754964] xhci_hcd 0000:00:01.0: ibm,create-pe-dma-window(2027) 800 8000000 20000000 18 1c returned 0 (liobn = 0x80000001 starting addr = 8000000 0) [ 1.760829] xhci_hcd 0000:00:01.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000014 [ 1.774770] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.785503] hub 1-0:1.0: USB hub found [ 1.786843] hub 1-0:1.0: 4 ports detected [ 1.792664] xhci_hcd 0000:00:01.0: xHCI Host Controller [ 1.792809] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 [ 1.793014] xhci_hcd 0000:00:01.0: Host supports USB 3.0 SuperSpeed [ 1.795464] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.797774] hub 2-0:1.0: USB hub found [ 1.798075] hub 2-0:1.0: 4 ports detected [ 1.803150] rtc-generic rtc-generic: registered as rtc0 [ 1.803529] i2c /dev entries driver [ 1.804816] device-mapper: uevent: version 1.0.3 [ 1.806381] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 1.810102] usbcore: registered new interface driver usbhid [ 1.810202] usbhid: USB HID core driver [ 1.810523] drop_monitor: Initializing network drop monitor service [ 1.811474] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.814946] NET: Registered protocol family 17 [ 1.815888] Key type dns_resolver registered [ 1.816693] drmem: No dynamic reconfiguration memory found [ 1.825035] registered taskstats version 1 [ 1.827480] pstore: Using crash dump compression: deflate [ 1.833029] printk: console [netcon0] enabled [ 1.833167] netconsole: network logging started [ 1.834556] rtc-generic rtc-generic: setting system clock to 2020-10-01T07:51:13 UTC (1601538673) [ 1.842209] md: Waiting for all devices to be available before autodetect [ 1.842294] md: If you don't use raid, use raid=noautodetect [ 1.845670] md: Autodetecting RAID arrays. [ 1.845786] md: autorun ... [ 1.845836] md: ... autorun DONE. [ 1.869516] EXT4-fs (sda): mounted filesystem without journal. Opts: (null) [ 1.869996] VFS: Mounted root (ext4 filesystem) readonly on device 8:0. [ 1.873482] devtmpfs: mounted [ 1.950661] Freeing unused kernel memory: 1600K [ 1.950792] This architecture does not have kernel memory protection. [ 1.950962] Run /sbin/init as init process [ 2.218206] mount (50) used greatest stack depth: 10768 bytes left [ 2.268591] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.272854] EXT4-fs (sda): re-mounted. Opts: (null) [ 2.273879] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 2.300296] mkdir (52) used greatest stack depth: 10608 bytes left [ 2.527038] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:01.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 2.595157] hid-generic 0003:0627:0001.0001: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:01.0-1/input0 Starting syslogd: [ 2.660079] start-stop-daem (62) used greatest stack depth: 10064 bytes left OK Starting klogd: [ 2.778966] usb 1-2: new high-speed USB device number 3 using xhci_hcd OK [ 3.186579] input: QEMU QEMU USB Mouse as /devices/pci0000:00/0000:00:01.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.189397] hid-generic 0003:0627:0001.0002: input: USB HID v0.01 Mouse [QEMU QEMU USB Mouse] on usb-0000:00:01.0-2/input0 Running sysctl: OK [ 3.510176] S02sysctl (69) used greatest stack depth: 9600 bytes left Saving random seed: [ 3.640330] random: dd: uninitialized urandom read (512 bytes read) [ 3.677833] dd (81) used greatest stack depth: 7248 bytes left OK Starting network: udhcpc: started, v1.31.1 udhcpc: sending discover udhcpc: sending select for 10.0.2.15 udhcpc: lease of 10.0.2.15 obtained, lease time 86400 deleting routers adding dns 10.0.2.3 OK Starting tests TODO: add some more tests Ending tests Welcome to Buildroot buildroot login: root # poweroff # This is the toolchain test suite Usage: /etc/init.d/S90tests start Stopping network: OK Saving random seed: [ 8.029159] random: dd: uninitialized urandom read (512 bytes read) OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only [ 8.256910] EXT4-fs (sda): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff [ 11.285509] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 11.299419] reboot: Power down