spawn qemu-system-sparc64 -M sun4u -kernel /builds/bootlin/toolchains-builder/build/opt/test-sparc64--glibc--stable/images/vmlinux -append rootwait root=/dev/sda console=ttyS0,115200 -drive file=/builds/bootlin/toolchains-builder/build/opt/test-sparc64--glibc--stable/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user -nographic OpenBIOS for Sparc64 Configuration device id QEMU version 1 machine id 0 kernel addr 404000 size 5e5038 kernel cmdline rootwait root=/dev/sda console=ttyS0,115200 CPUs: 1 x SUNW,UltraSPARC-IIi UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.1 built on Mar 12 2020 14:03 Type 'help' for detailed information [sparc64] Kernel already loaded PROMLIB: Sun IEEE Boot Prom 'OBP 3.10.24 1999/01/01 01:01' PROMLIB: Root node compatible: sun4u Linux version 5.4.58 (root@runner-48369508-project-3290221-concurrent-0) (gcc version 9.3.0 (Buildroot 2020.08-14-ge5a2a90)) #1 Thu Oct 1 09:45:17 UTC 2020 printk: bootconsole [earlyprom0] enabled ARCH: SUN4U Ethernet address: 52:54:00:12:34:57 MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits == 40) MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000] Kernel: Using 2 locked TLB entries for main kernel image. Remapping the kernel... done. OF stdout device is: /pci@1fe,0/pci@1,1/ebus@1/su PROM: Built device tree with 55040 bytes of memory. Top of RAM: 0x7e80000, Total RAM: 0x789a000 Memory hole size: 5MB Allocated 16384 bytes for kernel page tables. Zone ranges: Normal [mem 0x0000000000000000-0x0000000007e7ffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000000403fff] node 0: [mem 0x00000000009ea000-0x0000000007e7ffff] Zeroed struct page in unavailable ranges: 115635 pages Initmem setup node 0 [mem 0x0000000000000000-0x0000000007e7ffff] Booting Linux... CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus] CPU CAPS: [vis] Built 1 zonelists, mobility grouping off. Total pages: 15310 Kernel command line: rootwait root=/dev/sda console=ttyS0,115200 Dentry cache hash table entries: 16384 (order: 4, 131072 bytes, linear) Inode-cache hash table entries: 8192 (order: 3, 65536 bytes, linear) Sorting __ex_table... mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 114736K/123496K available (4306K kernel code, 242K rwdata, 1000K rodata, 184K init, 252K bss, 8760K reserved, 0K cma-reserved) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1 clocksource: tick: mask: 0xffffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns clocksource: mult[a000000] shift[24] clockevent: mult[1999999a] shift[32] Console: colour dummy device 80x25 calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy. Probably due to long platform interrupts. Consider using "lpj=" boot option. Calibrating delay loop... 599.04 BogoMIPS (lpj=1198080) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 8192 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 8192 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.0+0x58/0x180 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: -1, 6144 bytes, linear) NET: Registered protocol family 16 pci@1f,0: PCI IO [io 0x1fe02000000-0x1fe02ffffff] offset 1fe02000000 pci@1f,0: PCI MEM [mem 0x1ff00000000-0x1ffefffffff] offset 1ff00000000 pci@1f,0: SABRE PCI Bus Module ver[0:0] PCI: Scanning PBM /pci@1f,0 sabre ffe2e3e0: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff]) pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffefffffff] (bus address [0x00000000-0xefffffff]) pci_bus 0000:00: root bus resource [bus 00-02] pci 0000:00:01.1: [108e:5000] type 01 class 0x060400 pci_bus 0000:01: extended config space not accessible pci 0000:01:01.0: [108e:1000] type 00 class 0x068000 pci 0000:01:01.0: reg 0x10: [mem 0x1ff20000000-0x1ff20ffffff] pci 0000:01:01.0: reg 0x14: [io 0x1fe02000000-0x1fe02007fff] pci 0000:01:02.0: [1234:1111] type 00 class 0x030000 pci 0000:01:02.0: reg 0x10: [mem 0x1ff21000000-0x1ff21ffffff pref] pci 0000:01:02.0: reg 0x18: [mem 0x1ff22000000-0x1ff22000fff] pci 0000:01:03.0: [1095:0646] type 00 class 0x01018f pci 0000:01:03.0: reg 0x10: [io 0x1fe02008000-0x1fe02008007] pci 0000:01:03.0: reg 0x14: [io 0x1fe02008080-0x1fe02008083] pci 0000:01:03.0: reg 0x18: [io 0x1fe02008100-0x1fe02008107] pci 0000:01:03.0: reg 0x1c: [io 0x1fe02008180-0x1fe02008183] pci 0000:01:03.0: reg 0x20: [io 0x1fe02008200-0x1fe0200820f] pci 0000:00:01.0: [108e:5000] type 01 class 0x060400 pci_bus 0000:02: extended config space not accessible pci 0000:02:00.0: [8086:100e] type 00 class 0x020000 pci 0000:02:00.0: reg 0x10: [mem 0x1ff60000000-0x1ff6001ffff] pci 0000:02:00.0: reg 0x14: [io 0x1fe02800000-0x1fe0280003f] pci 0000:01:02.0: can't claim VGA legacy [mem 0x1ff000a0000-0x1ff000bffff]: no compatible bridge window pci 0000:01:02.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none pci 0000:01:02.0: vgaarb: bridge control possible pci 0000:01:02.0: vgaarb: setting as boot device (VGA legacy resources not available) vgaarb: loaded SCSI subsystem initialized /pci@1f,0/pci@1,1/ebus@1/eeprom@14,2000: Mostek regs at 0x1fe02002000 clocksource: Switched to clocksource tick NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 8192 bytes, linear) TCP established hash table entries: 1024 (order: 0, 8192 bytes, linear) TCP bind hash table entries: 1024 (order: 0, 8192 bytes, linear) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 0, 8192 bytes, linear) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 64 power: Control reg at 1fe02007240 workingset: timestamp_bits=62 max_order=14 bucket_order=0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler mq-deadline registered io scheduler kyber registered ffe30aa8: ttyS0 at MMIO 0x1fe020003f8 (irq = 5, base_baud = 115387) is a 16550A Console: ttyS0 (SU) printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [earlyprom0] disabled printk: bootconsole [earlyprom0] disabled scsi host0: pata_cmd64x scsi host1: pata_cmd64x ata1: PATA max UDMA/33 cmd 0x1fe02008000 ctl 0x1fe02008080 bmdma 0x1fe02008200 irq 7 ata2: PATA max UDMA/33 cmd 0x1fe02008100 ctl 0x1fe02008180 bmdma 0x1fe02008208 irq 7 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 ata1.00: 122880 sectors, multi 16: LBA48 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 122880 512-byte logical blocks: (62.9 MB/60.0 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 e1000 0000:02:00.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection rtc-m48t59 rtc-m48t59.0: IRQ index 0 not found rtc-m48t59 rtc-m48t59.0: registered as rtc0 NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 rtc-m48t59 rtc-m48t59.0: setting system clock to 2020-10-01T09:48:31 UTC (1601545711) EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:0. devtmpfs: mounted This architecture does not have kernel memory protection. Run /sbin/init as init process EXT4-fs (sda): re-mounted. Opts: (null) ext2 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Starting network: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready udhcpc: started, v1.31.1 udhcpc: sending discover udhcpc: sending select for 10.0.2.15 udhcpc: lease of 10.0.2.15 obtained, lease time 86400 deleting routers adding dns 10.0.2.3 OK Starting tests TODO: add some more tests Ending tests Welcome to Buildroot buildroot login: root # poweroff # random: crng init done This is the toolchain test suite Usage: /etc/init.d/S90tests start Stopping network: OK Saving random seed: OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only EXT4-fs (sda): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk reboot: Power down